The Best Irrigation Tire That Won’t Create Pivot Tracks

Continuous traffic on wet soil will compact, smear and heave dirt up on the sides creating a cavern. This prevents the water from seeping through the soil affecting your irrigation efficiency, crop yields, and creates problems when diving other vehicles over them when harvest comes.

Concave Vs. Convex Profiles

Pneumatic pivot tires have a rounded convex profile that digs into the ground to create traction. This pushes soil outwards and with the combination of wet soil and continuous traffic over the same route, causes rutting.

The EWRS-PIVOT airless irrigation tire is engineered to hold soil underneath the tire to prevent rutting. It achieves this with a concave profile and bi-directional tread along with a wide footprint. The concave profile and bi-directional tread hold the soil underneath the tire and the wide footprint distributes the weight across the footprint, which minimizes the issue of deep rutting.

Along with the anti-rutting design, the EWRS-PIVOT is an airless irrigation tire. Being an airless tire, there is no possibility of flat tires which takes time and money to fix. The EWRS-PIVOT is also built with rubber segments that bolt to the wheel. This makes it possible to service the tire right in the field. If a segment is damaged, you can remove that segment and replace it with a new one. Which is much cheaper and faster than having to replace a pneumatic irrigation tire when one gets damaged. No tire shop is needed.

The EWRS-PIVOT series

The EWRS-PIVOT airless center pivot irrigation tire solves all these issues. It is engineered specifically to mimic a pneumatic irrigation tires compression, a wide true-to-spec 14.9” x 24” profile to increase traction and a concave profile that increases floatation while preventing rutting.

The EWRS-PIVOT has a unique core hole geometry that compresses completely when pressure is applied. This allows the tire to compress like a pneumatic mimicking its traction as well as being self-cleaning, so you don’t have to worry about added weight to the system.

The concaved true to spec 14.9” X 24” profile keeps mud underneath the tire, spreads the weight over an increased surface area, and the aggressive tire tread pattern increases overall floatation and traction.

The EWRS-PIVOT’s high-quality rubber has UV protection, and the rims are made with high-strength steel that will last a lifetime. It is also a segmented tire. Each segment is attached to the rim with ¾” nuts. This allows you to service the tire and easily replace a segment when it’s damaged. The rubber on our tires will last 2-3 times the life span of your traditional pneumatic irrigation tires, without the risk of going flat.

The EWRS-PIVOT airless center pivot irrigation tire is engineered to solve the problems that farmers face when it comes to field sprinklers while not creating new ones. The unique design is a cost-effective problem-solving solution allowing you to trust your irrigation tires not to fail on you.

tooltip-1 tooltip-2 tooltip-3 tooltip-4 tooltip-5 tooltip-6
patent pending
Play button airless center pivot irrigation tires
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
EWRS-PIVOT sunset in field

EWRS-PIVOT SERIES

The EWRS-PIVOT series of airless pivot tires from Evolution Wheel offers the most advanced airless technology to the irrigation market. This solution delivers serviceability, traction, and floatation into one impressive offering.

Our tread design and tire profile offer greater traction through mud and obstacles. The unique concave contact face helps eliminate rutting by keeping dirt under the tire, where it belongs. The face of the tire is pointed inwards. Compared to typical pneumatic irrigation tires which convex shape push mud out from under the tire, causing ruts.

Our proprietary segmented design bolts onto our high strength wheel, allowing you the ability to service the tire quickly, eliminating the need to change a tire in the field.

Unlike other airless pivot tires, the EWRS-PIVOT compresses flat pushing material out, it's a self-cleaning system. The compressed cores elongate the footprint of the tire allowing it to wrap over obstacles increasing traction and reducing ground pressure.