The Best Airless Pivot Tire for a Reinke Pivot System
Why should you use the EWRS-PIVOT airless irrigation tire on your Reinke pivot system? There are actually 5 reasons. We at Evolution Wheel wanted to design a pivot tire that will solve all the problems farmers encounter with their irrigation tires, so we did.
5 Reasons Why You Should use an EWRS-PIVOT Airless Pivot Tire
- No Flats
- Increased Traction
- Increased Floatation
- Serviceability
- Cost-Effective
No Flats
The EWRS-PIVOT airless irrigation tire is a no flat tire. Flat tires in the field are a headache. If they are not caught early enough, a flat will damage the tire beyond repair which may even cause damage to the gearbox or other components of the tower. The downtime that flat tires cause, affects irrigation efficiency and takes employees from other tasks to get the system back up and running. Using the EWRS-PIVOT irrigation tire, you will never have to replace flat tires in the field ever again.
Increased Flotation That Prevents Ruts
Floatation is important for preventing deep rutting. The EWRS-PIVOT tackles this problem with its bi-directional, also known as non-directional, tread design along with its concave profile. The concave profile keeps mud under the tire teamed with the bi-directional tread, increasing floatation like no other tire. On top of that, the EWRS-PIVOT has a true-to-spec wide 14.9 x 24 profile that increases the contact area with the ground.
Increased Traction
Even though the EWRS-PIVOT is an airless tire, it is designed to compress as a pneumatic would. Its unique core geometry compresses completely allowing the tire to flex and also push material out of the core holes making it a self-cleaning system. This along with its aggressive bi-directional tread design maximizes traction.
Serviceability
The EWRS-PIVOT is made with rubber segments that bolt onto the high-strength steel rim. With a rim that will last decades all you need to do when the rubber wears out is purchase a new set of rubber segments, then replace them right in the field with only a wrench.
With that being said, the EWRS-PIVOT is built with UV protection and will last 2-3 times the lifespan of a premium pneumatic pivot tire.
Cost-Effective
When you sum up the added expenses of flat tires, gearbox damage, labor, and downtime costs, pneumatic tires get expensive. When using the EWRS-PIVOT airless irrigation tire, you don’t have to worry about all the extra maintenance and costs associated with it. Providing you with a cost-effective tire solution for your Reinke pivot system.
The EWRS-PIVOT Airless Pivot Irrigation Tire
The EWRS-PIVOT airless pivot irrigation tire solves all these issues. It is engineered specifically to mimic a pneumatic irrigation tires compression, a wide true-to-spec 14.9” x 24” profile to increase traction and a concave profile that increases floatation while preventing rutting.
The EWRS-PIVOT has a unique core hole geometry that compresses completely when pressure is applied. This allows the tire to compress like a pneumatic mimicking its traction as well as being self-cleaning, so you don’t have to worry about added weight to the system.
The concaved true to spec 14.9” X 24” profile keeps mud underneath the tire, spreads the weight over an increased surface area, and the aggressive tire tread pattern increases overall floatation and traction.
The EWRS-PIVOT’s high-quality rubber has UV protection, and the rims are made with high-strength steel that will last a lifetime. It is also a segmented tire. Each segment is attached to the rim with ¾” nuts. This allows you to service the tire and easily replace a segment when it’s damaged. The rubber on our tires will last 2-3 times the life span of your traditional pneumatic irrigation tires, without the risk of going flat.
The EWRS-PIVOT airless pivot irrigation tire is engineered to solve the problems that farmers face when it comes to pivot irrigation while not creating new ones. The unique design is a cost-effective problem-solving solution allowing you to trust your irrigation tires not to fail on you.
EWRS-PIVOT SERIES
The EWRS-PIVOT series of airless pivot tires from Evolution Wheel offers the most advanced airless technology to the irrigation market. This solution delivers serviceability, traction, and floatation into one impressive offering.
Our tread design and tire profile offer greater traction through mud and obstacles. The unique concave contact face helps eliminate rutting by keeping dirt under the tire, where it belongs. The face of the tire is pointed inwards. Compared to typical pneumatic irrigation tires which convex shape push mud out from under the tire, causing ruts.
Our proprietary segmented design bolts onto our high strength wheel, allowing you the ability to service the tire quickly, eliminating the need to change a tire in the field.
Unlike other airless pivot tires, the EWRS-PIVOT compresses flat pushing material out, it's a self-cleaning system. The compressed cores elongate the footprint of the tire allowing it to wrap over obstacles increasing traction and reducing ground pressure.
Related Pages
If this page was informative, check these out:
