Best Airless Pivot Tire for a Reinke Irrigation System

Why should you use the EWRS-PIVOT airless irrigation tire on your Reinke irrigation system? There are actually 5 reasons. We at Evolution Wheel wanted to design a pivot tire that will solve all the problems farmers encounter with their irrigation tires, so we did.

5 Reasons Why You Should use an EWRS-PIVOT Airless Pivot Tire

  • No Flats
  • Increased Traction
  • Increased Floatation
  • Serviceability
  • Cost-Effective

No Flats

The EWRS-PIVOT airless irrigation tire is a no flat tire. Flat tires in the field are a headache. If they are not caught early enough, a flat will damage the tire beyond repair which may even cause damage to the gearbox or other components of the tower. The downtime that flat tires cause, affects irrigation efficiency and takes employees from other tasks to get the system back up and running. Using the EWRS-PIVOT irrigation tire, you will never have to replace flat tires in the field ever again. 

Increased Flotation That Prevents Ruts

Floatation is important for preventing deep rutting. The EWRS-PIVOT tackles this problem with its bi-directional, also known as non-directional, tread design along with its concave profile. The concave profile keeps mud under the tire teamed with the bi-directional tread, increasing floatation like no other tire. On top of that, the EWRS-PIVOT has a true-to-spec wide 14.9 x 24 profile that increases the contact area with the ground.

Increased Traction

Even though the EWRS-PIVOT is an airless tire, it is designed to compress as a pneumatic would. Its unique core geometry compresses completely allowing the tire to flex and also push material out of the core holes making it a self-cleaning system. This along with its aggressive bi-directional tread design maximizes traction.  

Serviceability

The EWRS-PIVOT is made with rubber segments that bolt onto the high-strength steel rim. With a rim that will last decades all you need to do when the rubber wears out is purchase a new set of rubber segments, then replace them right in the field with only a wrench.

With that being said, the EWRS-PIVOT is built with UV protection and will last 2-3 times the lifespan of a premium pneumatic pivot tire.

Cost-Effective

The EWRS-PIVOT tire eliminates the cost of flat tires and unnecessary downtime caused by stuck pivots and poor traction. Though the initial investment to purchase an EWRS-PIVOT is higher than a traditional pneumatic, when incorporating all these other expenses, lowers your cost/hr and increases your ROI on your machine.

tooltip-1 tooltip-2 tooltip-3 tooltip-4 tooltip-5 tooltip-6
EWRS-PIVOT sunset in field
Play button airless center pivot irrigation tires
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
EWRS-PIVOT Tire in mud

EWRS-PIVOT SERIES

The EWRS-PIVOT series of airless pivot tires from Evolution Wheel offers the most advanced airless technology to the irrigation market. This solution delivers serviceability, traction, and floatation into one impressive offering.

Our tread design and tire profile offer greater traction through mud and obstacles. The unique concave contact face helps eliminate rutting by keeping dirt under the tire, where it belongs. The face of the tire is pointed inwards. Compared to typical pneumatic irrigation tires which convex shape push mud out from under the tire, causing ruts.

Our proprietary segmented design bolts onto our high strength wheel, allowing you the ability to service the tire quickly, eliminating the need to change a tire in the field.

Unlike other airless pivot tires, the EWRS-PIVOT compresses flat pushing material out, it's a self-cleaning system. The compressed cores elongate the footprint of the tire allowing it to wrap over obstacles increasing traction and reducing ground pressure.